![[Image of Tracker 2610 - A temperature and humidity sensor that plugs into a Tracker to provide an environmental monitoring capability.]](../dyn/product_33.jpg)
Tracker 2610
The Tracker 2610 is designed to monitor the ambient temperature and humidity of locations such as an equipment room.
Choose an option...
Contact Us
Download a document:
- Data port: RS232 serial terminated in a 9-pin female 'D' type connector.
- Data format: 9600 baud, no parity, 8 data bits, 1 stop bit.
- Handshaking: none.
- Input voltage: 5V DC.
- Backup: all configurations held indefinitely in non-volatile memory.
- Temperature: range 10-50°C, resolution 1°C, accuracy ±2°C.
- Humidity: range 10-90% relative humidity (RH), resolution 1% RH, accuracy ±5% RH.
- Log Rate: 5, 10, 30 seconds, 1, 5, 10, 30 minutes or 1, 2, 4 hours.
- Alarms: low and high temperatures and humidity.
- Hysteresis 1°C, 5% RH.
- Dimensions: width 80 mm/3.2 inches; height 100 mm/4 inches; depth 44 mm/2 inches; weight 320g.
- Serial / power cable: 5 metres supplied with each unit.
- Casing: Free standing or wall mounted.
Related Products
The 5 metre serial cable supplied with every Tracker 2610 allows you to mount it in a convenient location within a room. It is powered from a 5 volt line on its serial interface, allowing it to be driven by another device. We recommend using the Tracker 2610 in conjunction with the Tracker 2740 series or 2750 to create a platform that can monitor a number of different environmental conditions.
Logged temperature and humidity data can be output at a rate determined by you and alarm set points can be configured to trigger an immediate report of excursions outside of normal conditions. Once the temperature or humidity has returned to the normal range, a further report is generated.
The Tracker 2610 may be controlled and configured via its serial interface using commands that include configurations for log rate, alarm setpoints and status request.
If you would like to know more about this product, then please contact us.